ПРИБОР ДЛЯ ИСПЫТАНИЯ УСТОЙЧИВОСТИ НА ИЗГИБ ПО БЭЛЛИ
6-Station Cold Condition Bally Tester 220V
6 Station Cold Capable Bally Flex Tester 220V
Designed with a remote controller and smaller footprint, requiring only 22" (559 mm) of length inside an environmental chamber. Designed to run in an environmental chamber to temperatures of -30C. It comes with a digital temperature display, a digital soak timer, and a digital counter.
6-Station Pilling Tester 220V
Used for evaluating textile pilling, fabric pilling, woven material pilling or leather abrasion resistance. Test samples are typically rubbed against known abradants such as nylon brush, sponge, or Velcro for a set number of cycles and then compared to industry test standards (such as ASTM D3512) or standards developed in your own lab to document the degree of pilling.
6-Station Cold Condition Bally Tester System with Freezer
Freezer includes a freezer with a scissor lift, and control panel all mounted to a steel tubular base. The control panel has a digital temperature display, a digital soak timer, and a digital counter.
Perforated Leather Abrasion Tester
Single station abrasion (fiber fluff) tester designed to perform tests on materials in accordance with Toyota Specification TIS 01208-00F21. The machine is used for evaluating a leather sample’s ability to resist abrading. The cycle speed is 70 CPM (adjustable) with a 20mm operating stroke.
12-Station Ambient Condition Bally Tester 220V
Evaluates the flexural fatigue resistance of leather, composites, vinyl, surface finishes, and other materials. Up to twelve specimens are folded and clamped between fixed lower clamps and oscillating upper clamps. Each cycle flexes a crease in the specimen to evaluate the specimen’s propensity to crack, similar to the crease that forms in a shoe’s upper that flexes during walking.