Главная » Производители » SCHAP, США » ПРИБОР ДЛЯ ИСПЫТАНИЯ ТКАНИ НА ИСТИРАНИЕ

ПРИБОР ДЛЯ ИСПЫТАНИЯ ТКАНИ НА ИСТИРАНИЕ

Veslic Colorfastness Abrasion Tester

ПРИБОР ДЛЯ ИСПЫТАНИЯ ТКАНИ НА ИСТИРАНИЕ

Veslic Colorfastness Abrasion Tester

Used for colorfastness to rubbing tests (similar to crocking) of leather, finished textiles, and other materials. The machine features three stations that can be individually set to 500g or 1,000g loads, and up to 25% stretch.

 

 


Аналогичные товары

ПРИБОР ДЛЯ ИСПЫТАНИЯ УСТОЙЧИВОСТИ НА ИЗГИБ ПО БЭЛЛИ

6-Station Cold Condition Bally Tester 220V

ПРИБОР ДЛЯ ИСПЫТАНИЯ УСТОЙЧИВОСТИ НА ИЗГИБ ПО БЭЛЛИ

Designed with a remote controller and smaller footprint, requiring only 22" (559 mm) of length inside an environmental chamber. Designed to run in an environmental chamber to temperatures of -30C. It comes with a digital temperature display, a digital soak timer, and a digital counter.

подробнее

ПИЛЛИНГ ТЕСТЕР

Pilling Tester with all Options

ПИЛЛИНГ ТЕСТЕР

Used for evaluating textile pilling, fabric pilling, woven material pilling or leather abrasion resistance. Test samples are typically rubbed against known abradants such as nylon brush, sponge, or Velcro for a set number of cycles and then compared to industry test standards (such as ASTM D3512) or standards developed in your own lab to document the degree of pilling.

подробнее

ПРИБОР ДЛЯ ИСПЫТАНИЯ КОЖИ НА ИСТИРАНИЕ

Perforated Leather Abrasion Tester

ПРИБОР ДЛЯ ИСПЫТАНИЯ КОЖИ НА ИСТИРАНИЕ

Single station abrasion (fiber fluff) tester designed to perform tests on materials in accordance with Toyota Specification TIS 01208-00F21. The machine is used for evaluating a leather sample’s ability to resist abrading. The cycle speed is 70 CPM (adjustable) with a 20mm operating stroke.

подробнее

ПИЛЛИНГ ТЕСТЕР

6-Station Pilling Tester

ПИЛЛИНГ ТЕСТЕР

Used for evaluating textile pilling, fabric pilling, woven material pilling or leather abrasion resistance. Test samples are typically rubbed against known abradants such as nylon brush, sponge, or Velcro for a set number of cycles and then compared to industry test standards (such as ASTM D3512) or standards developed in your own lab to document the degree of pilling.

подробнее

Вы нашли нужное для вас решение, но у Вас остались вопросы?
Напишите нам, и наш консультант подробно ответит Вам.
Всегда рады сотрудничеству!